Leather Area Measuring Machine (CONVEYOR MODEL)
- The incidence of ambient light is much reduced which improves precision and allows the machine to work well even in brighter light.
- Even thin transparent leather can be measured accurately.
- Suitable for measuring both finished leather & Wet blue.
- New functions like battery back – up system, self calibration, real time clock and area clipping as standard features add-up to increased reliability to make ELM3000 the unbeatable leather measuring machine in the world.
- A modern ‘Stamper’ with seven segment hot stamping head and no moving part except the stamping pad can be fitted on the machine as optional. It marks the individual Area, your company emblem and the grad on the leather itself.
- No more smudging and no danger of messy ink transfers from one skin to the next since it is a hot stamping process.
To compensate for elasticity & folding of certain leathers and the microcontroller will increase the measurement by a chosen percentage, which will be indicated on print-out.The function can be disabled if required, to suit the local legislation/practice.
The user chooses 2 limits, lower limit, upper limit, therefore classifying the hides in 3 categories – below, in between, above. For each skin the machine will automatically indicate the category, therefore sorting the hides by their size.
For ease of maintenance the machine is provided with self test power, and will indicate automatically to the service engineer, the condition of the measuring bridge and the exact position of defective cells, if any.
SELF DIAGNOSTIC – SELF CORRECTION
When a cell is faulty, being ‘dead’ (no measurement), or ‘counting’ (increments continually) the self diagnostic feature will warn the operator and he should call the service department. Still it will allow him to continue to measure accurately, thanks to the self correction circuit.
BATTERY BACK – UP
Work can start without waste of time and redoing the measurement already done when there is sudden power failure since all the data's set and values being measured are kept in memory.
If any skin has been fed incorrectly, you can re-measure it after actuating the skin cancel switch. The incorrect area will be subtracted from all memories and the operation will be printed clearly.
MASS STORAGE OPTION
Pen drive: whatever is the printer our it resembles in the pen drive.Maximum storage is up to 16 GB.
Barcode and QR code can be done.
PC interface can be done.